GearEssentials

D from California posted a review on gear essentials.com yesterday.  He writes:

"I got my hands on one of these, it is nice and hefty, looks great and feels great. It is a bit if a challenge to get screws in place and a bit pinchy at times."

D is right; it CAN be a challenge to get those little screws lined up right. We are working on figuring out an easier way. (E.g. getting one screw started before you put it on?  This is how we train guys to put on the ball weights--and it really helps.) We have found that it really does get easier with practice. We have also found that most guys get a boner as soon as they put it on--and that does not make it any easier to get the Hold screwed together either!  

Below are some pictures of an International Mr. Leather (IML) customer who also got a boner when putting on his new Hold (of course, he had us there to help him put it on too!)  But we don't complain about boners--enjoy it!

 

The Hold Cock & Ball Cage & the Titan .2 Glans Ring--a Stunning Combination

 

The GearFan pictured is wearing his NEW Hold AND the Titan .2 glans ring.  This really is a great combination.  The Hold is a cock ring as well as a shaft ring so it keeps the blood pumped in your dick.  The Titan .2 fits right below your head and it always amazes me how much bigger the head of your dick can get!  Like a cock ring, it restricts blood flow from leaving--so your head gets bigger.  Why is this a big deal?  If you are fucking, your partner is really going to notice the difference in the size of your knob.  It also increases the wearer's sensitivity to the point where a single touch or stroke can send shivers up and down your spine.

A glans ring also feels great when you are flaccid.  The weight of the ring gently massages the amazingly sensitive nerve endings beneath the base of your dick as you move throughout your day.  Admittedly it is most effective when wearing loose clothing so you get plenty of schwing.  Many of our customers have commented that it is like getting a 'mini hand-job' in your pants.

 

A Stunning Combination & A Stunning Dick:  Pumped up by the Hold & Titan .2 Head Ring

 

The Hold is a must-have cockring if you want something unique, bigger and bolder with a mega wide bandwidth (1.5" / 38 mm).  It is now gear essentials' widest penis ring--and because of the built in 'ball sac hole' just about anyone can wear it.  (In other words, you don't need a really long ball sac to be able to flop over it and fit into it.)

It comes in three sizes.  Interior diameters are:  1 3/4" (44.5 mm), 1 7/8" (47.6 mm) and 2" (50.8 mm).  These generally correspond to your normal cock ring size.  However, we have had some guys who are thicker than average (shaft-wise) and have had to upsize.

The Hold is a split ring cock ring that hand screws together. Slip the larger half over your cock and balls and push it snugly against your pubes allowing your balls to drop through the wide slot.  Then slide the head of your dick through the outer ring. (I wear our widest 1.5” diameter ball weight and have no problem fitting my balls through the slot; however, if you have a set of bull balls this might be a bit of a squeeze.)  The first time I put it on it took a few minutes by myself but now I can quickly get it on.  (Or share the fun--have a friend help!)

The band closest to your pubes is the wider of the two rings allowing you to get most of your balls in the indentation or wide slot before screwing on the outside ring.  The outer ring tapers to a narrower opening which adds weight and acts as a shaft ring.  The narrowed shaft ring feels hot when you're hard and adds an extra level of support (see the pictures above...and below!) 

 

Thicker, Harder, Longer & More Sensitive Due to the Hold / Glans Ring Combo

 

Experience a stunning combination and experience better sex!  You (and your partner) won't know what hit you!

gear essentials…Sex is Better here! ENJOY!

  

WHERE TO FIND IT:    

 

(Photos by Jay Williams.) 

Written by Jay — June 30, 2014

Leave a comment

Please note: comments must be approved before they are published.