On August 17, 2013, we posted a blog entitled Ball Weight Stacking on Low Hangers. In it we showed a picture of an impressive guy with really low hanging balls pulled taut by two ball stretchers.

Minotaur DC left the following question: Any more pics / video instructions how to put them on? Any pics of friends/other GearEssential clients who wear more weight?”

We figured that there may be some other folks out there interested in our answer—so here it is: How to Stack Ball Stretchers


Dates of Blogs Showing Pictures of Guys wearing Stacked Weights

Hi, Minotaur! We LOVE Ball Stacking! We don't have any videos on ball stacking (yet!) but we posted pictures and blogs of stacking on GearBlog on the following dates in 2013: May 25, April 17, April 6, February 25, February 15 & January 17. There were two posts in 2012 on November 21 (both were of Erich--we are HUGE fans of him!)


How to Stack Ball Stretchers

The "How To" is pretty simple. As an example, when I stacked two weights to get to 24 ounces, I started with the largest weight first. In this case, it was the 16 ounce ball stretcher. Once that was on, it 'contained' my balls (so I didn't have to worry about squeezing them together to get the next weight on) and the weight of it pulled my nads down and out of the way. When putting just one weight on I always recommend keeping it slightly screwed in so the screw acts as a 'hinge'. That way you don't have to worry about getting two sides connected--just the one. I did this for the first ball weight (the 16 ounce).

Ball Stacking: Stack ‘em Up & Enjoy the Tug! Check out gear essentials’ Weights


When putting on the second ball weight, I completely unscrew it (because there isn't enough room to swing the weight around on its 'hinge' point. So I slid the second ball stretcher on just above the 16 ounce weight, fit the two sides together, made sure my 'tender' ballsac skin was out of the way and squeezed the two halves together. Once that was done I put the screw in and tightened (stopping to make sure there was no skin caught mid-way through the process). It's pretty easy actually. (And this process is easiest when you are hot and fresh out of a shower, sauna, etc. When you are hot your balls DROP!)

At that time, if I had tried to get the 24 ounce ball stretcher on, I don't think I could have done it. I wasn't stretched far enough to enable me to grab enough skin between my balls and the base of my dick to get it all through the 1 1/2" tunnel created when you close the ball weight. By breaking it into two steps (with two different ball weights) it was easier because the heavier weight assisted in getting the lighter weight on (because it pulled my balls down and out of the way).

In no time I was able to ‘graduate’ to the larger 24 ounce ball weight. The next step for me? The 32! (I’ll let you know how that goes!)

Now, I don’t wear 24 ounces worth of metal on my balls when I head off to the office each day (although I do wear 8 ounces regularly); however, during play it feels incredible! It’s an experience that every man (and his partner) should experience.

Link to gear essentials’ ball weights:

Link to gear essentials’ sizing guide:

gear essentials…Sex is Better here! ENJOY!




(Photo re-posted from Tumblr.)

Written by Jay — August 21, 2013

Leave a comment

Please note: comments must be approved before they are published.